Vehicle: 2025 ISUZU 33,000# GVWR Diesel Cab-Over Model FVR. 2025-0930-0001
Contract #: 05916 - Trucks - Cab & Chassis ( 2WD - 4WD)
Dealer: RWC International LTD
 
Vehicle Standard Specifications And Additional Information
Specification DescriptionSpecification
2025 ISUZU 33,000# GVWR (Class 7) Diesel Cab-Over Cab-Chassis Model FVR Rear Wheel Drive Standard Cab (3-person seating; tilt-cab)Standard
ENGINE (DIESEL): CUMMINS B6.7 6.7 liter (408 cubic inch) in-line 6-cylinder, turbocharged, inter-cooled, direct injection; (more detailed engine information provided later in this section)Standard
HORSEPOWER/TORQUE: 260 HP (Gross) at 2,400 RPM and 660 lb-ft torque (Gross) at 1,600 RPM Standard
ENGINE EMISSIONS: Federal Emissions System; not available for sale in California or other CARB (California Air Resources Board) adopting statesStandard
GVWR: 33,000#Standard
AVERAGE MPG (US DEPT OF ENERGY): N/A (not rated)Standard
TRANSMISSION: ALLISON 2500-RDS (Rugged Duty Service) Double Overdrive 6-speed automatic transmission (5th and 6th gear overdrive; lock-up converter in 2nd, 3rd, 4th, 5th, & 6th gear during acceleration and deceleration); Power Take Off (PTO) capability; SAE 6-bolt PTO opening; automatic torque convertor lock-up in stationary PTO mode; maximum PTO rating of 250 lb-ft torque Standard
POWER WINDOWS and POWER DOOR LOCKS: YesStandard
SPARE WHEEL and TIRE: N/AStandard
TIRES and WHEELS: (6) 11R22.5G 14-ply rating Low Rolling Resistance (LRR) Steel Belted Radial (SBR) tubeless blackwall tires (highway rib tread in front; highway traction tread at rear; BRIDGESTONE or CONTINENTAL; (6) ACCURIDE 22.5 inch x 8.25 inch 10-hole steel disc wheels with 11.25 inch diameter bolt circle (painted white)Standard
TIRE CHAIN/TRACTION DEVICE COMPATIBLE: Yes (rear wheel drive)Standard
SEATING CONFIGURATION: 3-Person (air suspension reclining high-back bucket driver seat with RH armrest; non-suspension reclining high-back bucket passenger seat; folding center seat with latched storage box on the back)Standard
SEATING MATERIAL: Foam seat cushions are covered with a durable gray and blue tricot flat woven breathable materialStandard
FLOORING MATERIAL: Molded gray vinyl with removable heavy duty black rubber floor matsStandard
BATTERY/CHARGING SYSTEM: 12-Volt negative ground; dual 12-Volt, Group 31, 750-CCA maintenance-free type batteries with threaded posts wired in parallel; 12-Volt, 160-Amp output alternator with internal regulatorStandard
FUEL TANK SYSTEM: 50-gallon (152 inch WB and 170 inch WB) or 100-gallon (188 inch WB, 200 inch WB, 212 inch WB, 224 inch WB; 236 inch WB; 248 inch WB); rectangular aluminum outboard mounted on the LH frame rail; frame mounted fuel/water separatorStandard
REAR AXLE RATIO: 5.57Standard
GROUND CLEARANCE: Front Axle = 10.0 inch / Rear Axle = 10.2 inch (figures plus or minus 1 inch)Standard
SKID PLATES: N/AStandard
AIR BAGS: N/AStandard
FLEET DEVIATIONS FROM RETAIL: NoneStandard
AIR CONDITIONING: Yes (CFC free)Standard
CRUISE CONTROL: YesStandard
TILT/TELESCOPING STEERING COLUMN: YesStandard
INTERMITTENT WINDSHIELD WIPERS: Yes (wet arm style)Standard
AM/FM/CD/BLUETOOTH/STEREO: Yes (factory installed; includes USB input, auxiliary input, dual speakers, and antenna)Standard
HEADLIGHT SYSTEM: Flush surface bi-LED headlamps with signature light and daytime running lights; integral parking, turn signal, and cornering lampStandard
TAILLIGHT SYSTEM: Combined rear lamps (turn signal/stop/back-up); shock mounted identification/clearance lamps; license plate bracket with lampStandard
ENGINE FEATURES (A): Variable geometry turbocharger; single high-capacity electronic control module; high pressure common rail fuel injection system; dual fuel filters (one mounted on the frame; one mounted on the engine); the frame mounted fuel filter incorporates a fuel/water separator and a hand operated fuel primer pumpStandard
ENGINE FEATURES (B): 30,000 mile / 1,000 hour / 18 month oil and oil filter change intervals; 60,000 mile / 2,000 hour / 18 month fuel filter change intervalStandard
ENGINE FEATURES (C): Engine warning system activated by low oil pressure, low coolant level, and/or high coolant temperature that provides an audible signalStandard
ENGINE EXHAUST AFTERTREATMENT SYSTEM (A): CUMMINS single module system which employs advanced DPF and SCR catalyst technologies; mounted below the RH frame railStandard
ENGINE EXHAUST AFTERTREATMENT SYSTEM (B): 10-gallon Diesel Exhaust Fluid (DEF) tank mounted behind the cab on LH frame rail (part of the SCR system); DEF usage should be approximately 1 percent of diesel fuel consumption (approximately 1 gallon of DEF used for every 100 gallons of diesel used)Standard
COOLING SYSTEM: Belt driven centrifugal water pump; 7-gallon capacity; radiator with 748 square inch frontal area and integrated transmission oil cooler; 11-blade fan with 24.8 inch diameter and electro-viscous drive hubStandard
AIR CLEANER SYSTEM: DONALDSON air cleaner canister with 11.0 inch diameter paper element; air cleaner snorkel incorporated into the back of the cab; air cleaner restriction indicator in the instrument clusterStandard
BRAKE SYSTEM: Full air dual circuit system; self-adjusting front and rear S-CAM drum brakes; anti-lock brake system (ABS) with self-diagnostic function; non-asbestos semi-metallic lining material; heated air dryer; air actuated parking brakes; air operated engine exhaust brake; 17 CFM air compressorStandard
ELECTRICAL SYSTEM FEATURES: LED compatible flasher; back-up alarm electrical connector; body mounting electrical connector; auxiliary power connector behind dash; single note electric hornStandard
REAR AXLE: DANA S21-140 21,000# full floating single speed; hyploid gearing; 12.6 inch ring gear diameter; oil lubricationStandard
REAR SUSPENSION: ISUZU 21,000# multi-leaf main springs (9 leaves) and auxiliary springs (1 leaf)Standard
FRONT AXLE: DANA E1254-W 12,000# drop forged steel Reverse Elliot I-Beam; bronze bushings; oil lubricationStandard
FRONT SUSPENSION: ISUZU 12,000# semi-elliptical tapered leaf springs (2 leaves); stabilizer bar; shock absorbersStandard
STEERING SYSTEM: High capacity integral power; 22.4:1 gear ratio; 50 degree inside wheel cut angleStandard
FRAME: Ladder type channel section with 33.5 inch width; 80,000 PSI yield strength steel; combined section modulus of 12.69 inch cubed; rated RBM of 1,015,000 lb-ft/inchStandard
CAB OVER ENGINE DESIGN: The Low Cab Forward (LCF) design employed in ISUZU cab-over trucks offers a 45-degree mechanical tilt with torsion assist and provides maximum cargo space within a given overall length, shorter overall length with a given body length, excellent weight distribution of payload, outstanding maneuverability, superb driver visibility, unimpeded engine access, and relatively easy entry/exit Standard
CAB DESIGN CONCEPT: Based on the Hexapod Design Concept; cab panels, radiator grille, headlights, and bumper are intended to bring maximum space to the cab interior while creating a bold look to the cab exterior; the cab interior provides ample headroom, leg room, and storage space; the cab exterior features large door openings with an 90-degree door swing and wide steps Standard
CAB ANTI-CORROSION PROTECTION: The Hexapod cab offers enhanced anti-corrosion treatments to insure long service life which include extensive use of galvanized steel panels in construction, increased thickness of galvanizing on panels, cation electro deposit primer E-coat, strong alkali-proof paint, undercoating on wheelwells, and self-cleaning resin doorsteps that cannot corrode Standard
CAB STRUCTURE: The Hexapod cab provides significant structural strength derived from side sills being a closed section, the under-frame being constructed of high tension-resistant steel, significant reinforcement in the front pillar area from the cowl to the rocker panel, and increased rigidity between the pillar area and the cowl that is enhanced by enlarged gussets Standard
CAB EXTERIOR FEATURES (A): Features include easy opening front panel/hood for ready access to the windshield wiper motor, wiper linkage, cab air intake filter, and electrical connections; large paddle type cab door handles that protect door paint and easily accommodate a gloved hand; full-width steel front bumper; front mud flaps; standard Arc White factory paint (DuPont Code 729)Standard
CAB EXTERIOR FEATURES (B): Features also include large breakaway function side view mirrors to protect cab doors with separate flat glass sections (approximately 15.0 inches high x 7.2 inches wide) and convex sections (approximately 7.7 inches high x 7.3 inches wide); convex downview mirror above passenger doorStandard
CAB INTERIOR FEATURES: Features include a spacious interior with noteworthy shoulder and head room which includes an extended cab providing space approximately 20 inches Deep x 40 inches High x 82 inches Wide between seatbacks and back of cab; LH and RH overhead shelves with latching doors; cigarette lighter with ashtray; 12-Volt auxiliary power outlet; dome light; molded vinyl door panels with storage pockets; 2-tone gray vinyl trimStandard
INSTRUMENT CLUSTER FEATURES (A): Features Include cruise main indicator light, cruise set indicator light, daytime running lights indicator light, engine alarm (shutdown) warning light, idling stop indicator light, reduced engine power indicator light, check engine malfunction indicator light, engine oil level indicator light, engine oil pressure warning light, glow plug indicator light, and service vehicle soon indicator lightStandard
INSTRUMENT CLUSTER FEATURES (B): Features also include multi-information display, headlights high beam indicator light, diesel exhaust fluid (DEF) indicator light, ABS warning light, exhaust brake indicator light, RH and LH turn signal indicator lights, hazard warning indicator lights, automatic transmission fluid temperature warning light, and check transmission warning light Standard
INSTRUMENT CLUSTER FEATURES (C): Features further include brake air pressure warning light; parking brake warning light, range inhibited warning light, battery discharge warning light, speedometer, tachometer, odometer, fuel gauge, coolant temperature gauge, and brake system air pressure gauges Standard
MANUFACTURER NEW VEHICLE WARRANTY: 3-year/Unlimited mile ISUZU base vehicle warranty; 3-year/Unlimited mile CUMMINS engine warranty; 3-year/Unlimited mile ALLISON automatic transmission warranty; ISUZU Roadside Assistance and towing for warrantable repairs for the duration of the ISUZU base vehicle warranty (refer to ISUZU Warranty and Owner Assistance Information Manual for more complete details regarding ISUZU warranty coverage; refer to ISUZU Roadside Assistance brochure for more complete deStandard
DELIVERY TIMEFRAME AFTER RECEIPT OF ORDER (ARO): Approximately 180 days to 270 days; as of this writing, supply chain constraints affecting the broad spectrum of materials, components, and logistics involved in the manufacture and distribution of ISUZU cab-over trucks are easing; this is allowing for better prediction of delivery timeframeStandard/Dealer
DISCLAIMER: Specifications as presented are subject to manufacturer modification without notice; however, it is highly unlikely that there will be any changes to the specifications as presented for the duration of the model yearStandard/Dealer