| 2024 Peterbilt 536 | STANDARD |
| Chassis shall have a GVWR of 25,500 lbs. | STANDARD |
| Wheel Base shall be 170 - 175 inches with a Set-forward axle. Specific wheel base requirements shall be determined and specified by the upfitter before chassis is ordered. | STANDARD |
| Cab to Axle (CA) shall be a minimum of 108 inches clear. | STANDARD |
| Bumper to Back of Cab (Excluding extension) shall be within the range of 107 inches to 114 inches. | STANDARD |
| Shall be a single frame rail design. | STANDARD |
| Shall be a minimum of 3/16? | STANDARD |
| Entire length of the frame rail shall be full depth, including an integral front frame extension. | STANDARD |
| The left frame shall be clear, between the fuel tank and the front hanger of the rear spring assembly. | STANDARD |
| There shall be no holes or bolts in the top flange of the frame rails. | STANDARD |
| Shall have 2 front tow hooks | STANDARD |
| Shall have a black steel front bumper. | STANDARD |
| Shall be air ride. | STANDARD |
| Shall have at least 21 inches of clear space between the driver and passenger seat. | STANDARD |
| Shall have metal guard mounted behind the grill to protect the radiator | STANDARD |
| Voltmeter gauge | STANDARD |
| Engine oil pressure gauge. | STANDARD |
| Tachometer | STANDARD |
| Hour meter | STANDARD |
| Coolant temperature gauge | STANDARD |
| Digital outside air temperature gauge. | STANDARD |
| Audible and visual low oil pressure alarm | STANDARD |
| Audible and visual high coolant temperature alarm | STANDARD |
| OEM air conditioning | STANDARD |
| Air horn | STANDARD |
| Shall have driver and passenger side heated and motorized west coast style or comparable side mirrors. The mirrors shall be equipped with an additional convex spot mirror. | STANDARD |
| Shall be equipped with electric, intermittent windshield wipers. | STANDARD |
| The interior cab noise level shall meet or exceed FMVSS requirements during normal operating conditions. | STANDARD |
| Shall be equipped with both interior and exterior egress / ingress assist handles on the driver?s side and interior grab handles on the passenger side. | STANDARD |
| Shall be equipped with an AM/FM radio with Bluetooth connection and speakers. | STANDARD |
| Shall be equipped with power windows and door locks. | STANDARD |
| Shall have adjustable steering column / steering wheel. | STANDARD |
| Driver and passenger seat shall be cloth covered high back air ride seats with lumbar support and arm rest. | STANDARD |
| Fuel tank Shall be Aluminum | STANDARD |
| Fuel tankShall have an 80 gallon capacity | STANDARD |
| Fuel tank Shall be mounted on the left side | STANDARD |
| fuel tank Shall have full encompassing rubber between the tank straps and the tank. | STANDARD |
| fuel tank Shall not extend past the back of the cab. | STANDARD |
| electrical system shall be 12 volt | STANDARD |
| Shall be equipped with halogen headlights. | STANDARD |
| Shall be equipped with a variable sound backup alarm | STANDARD |
| Batteries shall be a minimum of 2850 CCA | STANDARD |
| The batteries shall be equipped with a ground cable which will be attached to the frame rail. All cable ends shall be sealed and equipped with rubber retainers and covers. | STANDARD |
| All battery cables exiting the battery box shall be routed through rubber grommets. | STANDARD |
| alumnium battery box | STANDARD |
| battery box mounted RH side, jump studs underhood left hand side | STANDARD |
| 5 aux switches | STANDARD |
| beacon light switch on dash | STANDARD |
| load light switch on dash | STANDARD |
| electric tailgate switch on dash | STANDARD |
| Shall be equipped with an industry standard industrial 7 wire ABS trailer connector. | STANDARD |
| The connection points on the 7-wire plug will be sealed and watertight. Both sides of this receptacle shall be packed with dielectric grease. | STANDARD |
| The OEM, factory wired switch will prevent operation of the plow lights and headlights simultaneously. | STANDARD |
| Shall have pre-trip inspection light test button | STANDARD |
| Shall have a horn alarm that sounds when the vehicle parking brake is not set and the driver's door is opened. | STANDARD |
| Shall have a minimum of 310 Horsepower and 950 foot pounds of torque. | STANDARD |
| Shall be equipped with an engine compression brake. | STANDARD |
| Maximum road speed to be governed at 65 mph. | STANDARD |
| Shall be equipped with and OEM 110 volt block heater, with the receptacle located on the left side under the driver?s door. | STANDARD |
| Shall have unobstructed front crankshaft driven PTO provisions to include universal coupling flange. | STANDARD |
| Shall be dual element, with fresh air intake. | STANDARD |
| Shall be equipped with an air filter assembly restriction gauge. | STANDARD |
| The radiator shall be capable of sufficiently cooling the engine while the truck is operating at low speed in hot weather conditions. | STANDARD |
| Shall be equipped with a fan clutch. | STANDARD |
| Shall be equipped with a coolant filter/conditioner. | STANDARD |
| Shall be a single horizontal muffler and vertical pipe. The vertical pipe shall not protrude more than 3 - 5 inches behind the cab. | STANDARD |
| Shall have an under cab mounted horizontal DPF and DOC | STANDARD |
| The end of the exhaust pipe shall have a 45-degree tip out, positioned approximately 118 inches from the ground to the highest point of the tip out when the truck is empty. | STANDARD |
| Shall be an Allision RDSP 3500 | STANDARD |
| If Engine horsepower and torque are increased beyond the rating, transmission shall also be changed to match needed ratings. | STANDARD |
| The transmission shall be equipped with a speed sensor cover with dual ports. | STANDARD |
| 8k front axle w Sheppard MD83 Power Steering | STANDARD |
| Rear Axle shall be a leaf spring suspension with a 17,500 pound GAWR. | STANDARD |
| Rear axle ratio shall provide the ability for the truck to achieve a highway speed of 65 MPH. | STANDARD |
| Shall have an air activated rear axle power divider lock with indicator light. | STANDARD |
| Front wheels shall be aluminum | STANDARD |
| Front Tires shall be sized appropriately to achieve a font GAWR of 20,000 lbs. | STANDARD |
| Rear Wheels shall be power coated steel | STANDARD |
| Rear tires shall be sized appropriately to achieve a GAWR of 23,000 lbs. | STANDARD |
| All wheels shall have wheel guards installed on all axles. This will include guards between the hub and the wheel as well as in-between each wheel. (Duals) | STANDARD |
| Lead wheel weights will not be accepted by WSDOT | STANDARD |
| Front brakes shall be drum and properly sized for the truck's GVWR | STANDARD |
| Rear brakes shall be outboard drum and properly sized for the truck's GVWR | STANDARD |
| All Brake linings shall be non-asbestos | STANDARD |
| The air dryer, shall be mounted in a serviceable location and the filter will be a spin on style. This unit will not be located on the left side, inside or outside, frame rail. This area must be left open for WSDOT sanding equipment. | STANDARD |
| Shall have painted aluminum air tanks. | STANDARD |
| Air tanks shall be equipped with a lanyard style drain that is accessible by the driver. | STANDARD |
| Shall be equipped with a tractor protection valve. | STANDARD |
| Shall be equipped with a trailer brake hand control valve. | STANDARD |
| Shall include an operator's manual | STANDARD |
| Shall include free access to online parts manuals and chassis build sheets searchable by VIN number to include cab and chassis, engine and transmission | STANDARD |
| 60 month SmartLINQ subscription | STANDARD |